Trending - Carrier Touch Pilot Manual

Each program is in unoccupied mode unless a schedule time
period.is.active..
If.two.periods.overlap.and.are.both.active.on.the.same.day,.
the occupied mode takes priority over the unoccupied period.
Example: Schedule setting
Hour MON TUE WED THU
0:00 P1
1:00 P1
2:00 P1
3:00
4:00
5:00
6:00
7:00 P2 P2 P3
8:00 P2 P2 P3
9:00 P2 P2 P3
10:00 P2 P2 P3
11:00 P2 P2 P3
12:00 P2 P2 P3
13:00 P2 P2 P3
14:00 P2 P2 P3
15:00 P2 P2 P3
16:00 P2 P2 P3
17:00 P2 P2 P3
18:00 P3
19:00 P3
20:00 P3
21:00
22:00
23:00
MON: Monday
TUE: Tuesday
WED: Wednesday
THU: Thursday
FRI: Friday
SAT: Saturday
SUN: Sunday
HOL: Holiday
Period/Schedule Starts at
P1: Period 1 0:00
P2: Period 2 7:00
P3: Period 3 7:00
P4: Period 4 7:00
P5: Period 5 7:00
P6: Period 6 20:00
P7: Period 7 Not used in this example
P8: Period 8 Not used in this example
Holidays
The. control. allows. the. user. to. define. 16. holiday. periods,.
where.each.period.is.defined.by.three.parameters;.the.month,.
the start day and the duration of the holiday period.
During the holiday periods, the controller will be in occupied
or.unoccupied.mode,.depending.on.the.periods.validated.as.
holidays..Each.holiday.period.can.be.modified.by.the.user.
via.the.Configuration.menu.(see.also.section.4.9).
FRI SAT SUN
P4 P4 P5
P4 P4 P5
P4 P4 P5
P4 P4 P5
P4 P4 P5
P4 P4
P4 P4
P4 P4
P4 P4
P4 P4
Occupied
Unoccupied
Stops at Active on (days)
3:00 Monday
18:00 Monday + Tuesday
21:00 Wednesday
17:00 Thursday + Friday
12:00 Saturday
21:00 Holidays

7.18 - Trending

This.function.enables.to.visualise.the.operations.of.the.unit.
and monitor a set of selected parameters.
• To access the Trendings screen, go to the Main menu
and select Trendings (TRENDING).
• Select the parameters to be displayed and press the
HOL
Save button in the lower-left part of the screen.
• Press the Up/Down.buttons.to.navigate.between.the.
screens and see the graph showing the performance of
the unit within a selected period of time.
P6
Press the Settings button
for the Trendings display.
Press or
or press or
the selected period.
Press the Zoom in button
Zoom out button
Press the Refresh button
to adjust time and date settings
.to.navigate.across.the.timeline.
to go to the beginning or the end of
.to.magnify.the.view.or.the.
.to.expand.the.viewed.area..
to reload data.
29