Figure 6-3 Vor/Loc/Gs Configuration Page; Vor/Loc/Gs Configuration Page (Gtn 650/750 Only) - Garmin GTN 6 Series Maintenance Manual

6.6.2

VOR/LOC/GS Configuration Page (GTN 650/750 Only)

Select the VOR/LOC/GS key on the GTN Setup page. This page allows you to verify the CDI outputs
from the VOR/LOC/GS receiver as well as the OBS resolver input to the VOR receiver. It also allows you
to select the format for the DME tuning data.
OBS Resolver Calibration
To calibrate the OBS resolver, perform the following steps:
1. Touch the Calibrate key from the VOR/LOC/GS Configuration page.
2. Select 150˚ on the external CDI/HSI.
3. Touch the OK key when prompted by the display.
4. Touch OK after calibration is complete.
5. Verify OBS operation by checking that the selected course displayed at the top of the page is
within 2° of the selected course.
190-01007-B1
Rev. 4

Figure 6-3 VOR/LOC/GS Configuration Page

GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Page 6-18