Nav Antenna Cable Splitter; Nav Antenna Cable Diplexer; Htaws Annunciator; Cyclic Control Grip - Garmin GTN 6 Series Maintenance Manual

2.1.5

NAV Antenna Cable Splitter

The navigation antenna cable splitter (Garmin P/N 013-00112-00) is used for installations involving dual
VHF navigation capable GTNs or a single VHF navigation capable GTN installation with a second
non-Garmin navigation unit.
2.1.6

NAV Antenna Cable Diplexer

GTN 650/750 navigation units have a single navigation antenna port and require a composite signal for
those installations that include separate VOR/LOC and GS antennas. The navigation diplexer (Comant
diplexer VOR/GS, Model CI-507) is used for these installations.
2.1.7

HTAWS Annunciator

Installation of HTAWS annunciators is required when the optional HTAWS feature is activated. For
HTAWS annunciator installation and equipment details, refer to the model-specific installation drawing.
2.1.8

Cyclic Control Grip

An optional Otto Controls Flight Control Grip Kit (Otto Controls P/N G2-0048 or G2-B-8) may be
included with the GTN installation. For eligibility and detailed cyclic control grip kit information, refer to
the model-specific installation drawing.
190-01007-B1
Rev. 4
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Page 2-3