Table 5-4 lists part numbers for the fan kit that is used with P1001 only.
Refer to
Figure 5-7
1
Fan cable assembly, 3-conductor harness
2
Pin contact, crimp, #22D
3
Silicone fusion tape
Color
Red
Power
Black
Ground
Yellow
Fan tachometer
Fan Wiring Harness Replacement
1. Strip 0.17 inches of insulation from each wire prior to crimping.
2. Crimp socket contacts onto each wire of the 3-conductor wire harness.
3. Insert newly crimped socket contacts and wires into the appropriate connector housing location, as
shown in Figure 5-7.
4. Plug the 3-conductor wire harness connector into the connector on the fan.
4
2
A/R
1
NOTES:
1
WRAP FAN WIRES FITH FUSION TAPE SEPARATELY FROM THE MAIN HARNESS.
190-01007-B1
Rev. 4
Table 5-4 Fan Kit
Description
Table 5-5 Fan Cable Wire Color Reference Chart
Function
3
Figure 5-7 Fan Wiring Installation
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Garmin P/N
320-00600-00
336-00021-00
249-00114-00
P1001 Contact
59
43
58
1
Page 5-15