Checking The System Configuration; System Configuration - Omron SYSMAC FH Series User Manual

Checking the System Configuration

System Configuration

The FH/FZ5 is a Vision Sensor that uses a controller to process measurements of objects that are imaged with a
Camera.
You connect an LCD for operations and monitoring, and various Cameras to the FH/FZ5-series Sensor
Controller.
You connect external devices, such as a PLC or a computer, through a parallel, Ethernet, or RS-232C cable.
You can connect up to eight Cameras, depending on the model of the Controller.
To measure more than one line with a single Sensor Controller, you assign the Camera for the measurements to
each line beforehand, and switch between Cameras during the measurement flow.
External device (e.g., PLC)
FH/FZ5
LCD
FZ-VM Monitor Cable +
FZ-M08
FH-VMRGB DVI Adapter
(8.4-inch)
(DVI Adapter: FH-series
Vision Sensor only)
*1. FZ-MEM2G or FZ-MEM8G USB Memory is sold separately.
38

Checking the System Configuration

Communications cable
Communications protocol Communications cable
Parallel Parallel I/O cable
PLC Link Ethernet cable
RS-232C cable
EtherNet/IP Ethernet cable
EtherCAT Ethernet cable
Non-procedure Ethernet cable
RS-232C cable
Sensor Controller
• Controller with 2 Camera channels
• Controller with 4 Camera channels Camera Cable (e.g., FZ-VS)
• Controller with 8 Camera channels
WWW.NNC.IR
Connector on the FH
I/O connector
Ethernet connector
RS-232C connector
Ethernet connector
Connector for EtherCAT communications
Ethernet connector
RS-232C connector
Lighting
Camera
Up to 2, 4, or 8 Cameras
depending on the model of
the FH/FZ5-series Sensor
Controller
Camera
Vision System FH/FZ5 Series
User's Manual (Z340)