Mazda CX-3 Owner's Manual page 672

NOTE
The tyre sealant can be used at outside
temperatures down to
22 °F). In extremely cold temperatures
(0 °C (32 °F) or below), the tyre
sealant hardens easily and injection of
the sealant will be difficult. Warm the
sealant inside the vehicle before doing
the injection work.
6. Remove the cap from the bottle. Screw
on the injection hose with the bottle's
inner cap left on to break the inner cap.
Cap
Injection hose
Tyre sealant
7. Remove the valve cap from the flat
tyre. Press the back of a valve core tool
to the core of the tyre valve and bleed
all the remaining air.
Valve
Valve cap
CX-3_8GT4-EE-18D_Edition8_old
－ 30 °C ( －
8. Turn the valve core anticlockwise with
9. Insert the injection hose into the valve.
Valve core tool
Flat Tyre
CAUTION
If there is air remaining in the tyre when
the valve core is removed, the valve
core could fly out. Remove the valve
core carefully.
the valve core tool and remove the
valve core.
Valve
Valve core
NOTE
Store the valve core in a place where it
will not get dirty.
Valve
Injection hose
2019-11-14 12:53:52
If Trouble Arises
7-11