Mazda CX-3 Owner's Manual page 207

When Driving
Instrument Cluster and Display
⑧ Adjustable Speed Limiter (ASL) Display............................................................. page 4-28
⑨ Trip Computer and INFO Switch..........................................................................page 4-29
⑩ Active Driving Display......................................................................................... page 4-32
⑪ Speed Unit Selector...............................................................................................page 4-22
⑫ Odometer, Trip Meter, Trip Computer and Trip Meter Selector...........................page 4-24
▼ Speedometer
The speedometer indicates the speed of the
vehicle.
NOTE
(Analog speedometer type)
If a few seconds have elapsed after
switching the ignition off, the needle may
deviate. However, this does not indicate a
problem.
▼ Speed Unit Selector (Digital
*
Speedometer Type)
In some countries, you may have to
change the speed units between km/h and
mph.
Press the speed unit selector for 1.5
seconds or more.
The speed units for the speedometer will
change between km/h and mph.
Speed unit selector
4-22
*Some models.
CX-3_8GT4-EE-18D_Edition8_old
▼ Odometer, Trip Meter and Trip
Meter Selector
The display mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector while one of them is displayed.
The selected mode will be displayed.
Odometer
Trip meter A
Trip meter B
Speedometer
*
Selector
Press the selector
Press the selector
Press the selector
2019-11-14 12:53:52