Mazda CX-3 Owner's Manual page 505

Interior Features
Audio Set [Type A (non-touchscreen)]
Symptom
Disconnects intermittently
Does not connect automatically
when starting the engine
*
1 Setting which detects the existence of a device external to the Bluetooth
NOTE
When the OS of the device is updated, the pairing information may be deleted. If this
happens, reprogramme the pairing information to the Bluetooth
If you pair your phone which has already been paired to your vehicle more than once in
the past, you need to delete "Mazda" on your mobile device. Then, execute the
®
Bluetooth search on your mobile device once again, and pair to a newly detected
"Mazda".
Before you pair your device, make sure that Bluetooth
on the vehicle.
®
If Bluetooth -enabled devices are used in the following locations or conditions,
connection via Bluetooth
The device is in a location hidden from the unit such as behind or under a seat, or
inside the glove compartment.
The device contacts or is covered by a metal object or body.
The device is set to power-saving mode.
®
Different Bluetooth -enabled devices can be used for Bluetooth
®
Bluetooth audio. For example, device A can be connected as a Bluetooth
device and device B can be connected as a Bluetooth
following may occur when they are used at the same time.
®
The Bluetooth connection of the device is disconnected.
Noise occurs in the Hands-Free audio.
Hands-Free operates slowly.
5-70
CX-3_8GT4-EE-18D_Edition8_old
Cause
The device is in a location in which
radio wave interference can occur
easily, such as inside a bag in a rear
seat, in a rear pocket of a pair of
pants.
The pairing information is updated
when the device OS is updated.
®
may not be possible.
Solution method
Move the device to a location in
which radio wave interference is
less likely to occur.
Perform pairing again.
®
unit.
®
unit.
®
is "ON", both on your phone and
®
Hands-Free and
®
Hands-Free
®
audio device. However, the
2019-11-14 12:53:52