Mazda CX-3 Owner's Manual page 486

If a hands-free type mobile phone
has been the most recently paired
device, the Bluetooth
device. If you would like to use a
®
Bluetooth audio type device which
has been previously paired to the
®
Bluetooth unit, the link must be
changed to this device.
If an error occurs while trying to
link a device, "Err" flashes in the
display for 3 seconds, and the
display returns to "LINK
CHANGE". If this occurs, check the
pairing status of the Bluetooth
audio device and the location of the
device in the vehicle (not in the
luggage compartment or a
metal-type box), and then try the link
operation again.
Device selection can also be done
using voice recognition.
CX-3_8GT4-EE-18D_Edition8_old
Audio Set [Type A (non-touchscreen)]
How to confirm the device currently
linked
®
unit links this
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed first is the
device which is currently linked.
▼ Deleting a device (Bluetooth
Audio)
1. Using the audio control dial, select the
®
2. Press the audio control dial to
3. The name of the first device among the
4. Rotate the audio control dial and select
pairing delete mode "PAIR DELETE"
in the "BT SETUP" mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
determine the mode.
paired devices is displayed.
the name of the paired device you
would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
2019-11-14 12:53:52
Interior Features
®
audio
®
5-51