Accessory Socket - Mazda CX-3 Owner's Manual

Zoom-zoom
Hide thumbs Also See for CX-3:
Table of Contents

Advertisement

Interior Features
Interior Equipment

Accessory Socket

Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or
ON.
Type A
Type B
CAUTION
To prevent accessory socket damage or
electrical failure, pay attention to the
following:
Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
5-148
CX-3_8GT4-EE-18D_Edition8_old
Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
Close the cover when the accessory
socket is not in use to prevent foreign
objects and liquids from getting into
the accessory socket.
Correctly insert the plug into the
accessory socket.
Do not insert the cigarette lighter into
the accessory socket.
Noise may occur on the audio playback
depending on the device connected to
the accessory socket.
Depending on the device connected to
the accessory socket, the vehicle's
electrical system may be affected, which
could cause the warning light to
illuminate. Disconnect the connected
device and make sure that the problem is
resolved. If the problem is resolved,
disconnect the device from the socket
and switch the ignition off. If the problem
is not resolved, consult an expert repairer
(we recommend an Authorised Mazda
Repairer).
NOTE
To prevent discharging of the battery, do
not use the socket for long periods with the
engine off or idling.
2019-11-14 12:53:52

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents