Mazda CX-3 Owner's Manual page 332

How to change the set vehicle speed
To accelerate/decelerate using the SET
switch
When you press the SET switch, the
vehicle accelerates and when you press the
SET switch, it decelerates.
European
models
Short press 1 km/h (1 mph) 5 km/h (5 mph)
Long press 10 km/h (5 mph)
NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
(European models)
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).
(Except European models)
The vehicle speed accelerates or
decelerates by 20 km/h (20 mph).
To increase speed using accelerator
pedal
Depress the accelerator pedal and press
and release the SET switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.
CX-3_8GT4-EE-18D_Edition8_old
NOTE
When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
Except Euro‐
pean models
the set vehicle speed indication in the
display.
While depressing the accelerator pedal,
the colour of the MRCC indication
changes from green to white.
(European models)
When switching to a passing lane and
operating the direction indicator, the
system provides more acceleration
automatically if it determines that more
acceleration is required. Drive while
being careful of the road ahead because
you could approach the vehicle ahead
too closely.
Cancelling the system
If any of the following operations is done,
the MRCC cancels temporarily, the
MRCC set indication (green) switches to
the MRCC main indication (white), and
the MRCC set indicator light (green) turns
off at the same time.
The OFF/CANCEL switch is pressed.
The brake pedal is depressed.
The electric parking brake (EPB) is
applied.
Any of the doors is opened.
The driver's seat belt is unfastened.
(Manual transaxle)
The shift lever is in the reverse (R)
position.
When Driving
i-ACTIVSENSE
4-147
2019-11-14 12:53:52