Mazda CX-3 Owner's Manual page 503

Interior Features
Audio Set [Type A (non-touchscreen)]
8. Say: [Beep] "0123456789" (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: "Speaker enrolment is
complete."
NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
correctly and naturally.
(For example, "1234" must be read out
"one, two, three, four" not "twelve,
thirty four".)
Do not read out parentheses. "(" and
hyphens "-" are used for separating
numbers in a phone number.
Ex.
"(888) 555-1212" must be spoken "Eight,
eight, eight, five, five, five, one, two, one,
two."
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
5-68
CX-3_8GT4-EE-18D_Edition8_old
NOTE
The applicable phrase appears in the
audio display.
After user voice registration is
completed, voice guidance "Speaker
enrolment is complete" is announced.
Voice recognition learning on/off
1. Press the pick-up button or talk button
2. Say: [Beep] "Voice training"
3. Prompt: "Enrolment is enabled/
4. Say: [Beep] "Disable" or "Enable"
5. When "Disable" is spoken, the voice
6. Prompt: "Speaker Enrolment is
Command
with a short press.
disabled. Would you like to disable/
enable or retrain?"
recognition learning is turned off.
When "Enable" is spoken, the voice
recognition learning is turned on.
disabled/enabled."
2019-11-14 12:53:52