Sony HDC5500 Operating Instructions Manual page 8

g SDI 3 connector (BNC-type)
For HD PROMPTER signal output. Available only when
connecting a camera control unit with an HD PROMPTER
input connector.
h CALL button
When this button is pressed, the red tally lamp of the
RCP-1000 series or later Remote Control Panel or the
MSU-1500/1000 series Master Setup Unit will light. Use to call
the operator of the RCP or MSU.
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
Operation panel
b c
A
LIGHT
ON
OFF
PGM1
LEVEL MIC
INCOM
REAR ON
FRONT OFF
a
PGM1 control
PGM1 PGM2
LEVEL MIC
INCOM
REAR ON
FRONT OFF
INTERCOM 1
INCOM level control
LEVEL/MIC switch
a INTERCOM 1 and INTERCOM 2 controls and switches
There are separate PGM1 and PGM2 controls, line select/
receive MIX select switch, LEVEL/MIC switch, and INCOM
level control for both intercom line 1 and intercom line 2.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
LEVEL/MIC switch
REAR/ON: The intercom headset microphone is turned
on. The intercom audio listening level is adjusted
with the INCOM level control.
REAR/OFF: The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control.
d
RET/ASSIGNABLE
B C
DISP
MENU
PGM2 PGM1 PGM2
LEVEL MIC
INCOM
PROD PROD
REAR ON
MIX MIX
FRONT OFF
ENG ENG
PGM2 control
PGM1 PGM2
LEVEL MIC
INCOM
PROD PROD
REAR ON
MIX MIX
FRONT OFF
ENG ENG
INTERCOM 2
Line select / Receive
MIX select switch
FRONT/OFF: The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control and the INTERCOM
LEVEL control on the front of the camera (page 7).
INCOM (intercom) level control
Adjust the intercom audio listening level.
Line select / Receive MIX select switch
Select the intercom line.
PROD: Use the producer line.
ENG: Use the engineer line.
MIX: Receive mixed PROD/ENG audio. Select the
intercom talk line from the menu.
The default intercom line setting is ENG.
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu operations
using RET/ASSIGNABLE button C.
Connector panel
a
b
c
RET CTRL
FRONT MIC
d
LINE MIC
DC IN 10.5-17V
e
a EARPHONE jack (4-pole mini jack)
Connect to a headset, or earphones with microphone (3-pole/
4-pole earphones), to input/output the intercom audio signal.
8
REMOTE
EARPHONE DC OUT
CRANE
TRACKER
PROMPTER
/GEN
LOCK
AES/EBU
LINE MIC
TEST
+48V +48V
OUT
OFF OFF
AUDIO IN
CH1 CH2
SDI
MONI
m
f
g
h
i
j
k
l