Attaching The Cable Clamp Belt (Supplied) - Sony HDC5500 Operating Instructions Manual

Attaching the Cable Clamp Belt
(Supplied)
You can secure the camera cable to the camera by attaching
the supplied cable clamp belt.
1
Insert the belt bracket into hole A or B of the cable
clamp belt.
Belt bracket
2
Peel off the cover seal from the camera as shown in
the following diagram.
Cover seal
3
Secure the cable clamp belt to the camera, using the
two supplied +B3×8 screws.
Screws (+B3×8)
B
A
13
4
1 Release the buckle, 2 bundle the cable with the
belt, 3 then lock the buckle again.
1
3
Optical/electrical
multi cable
5
Adjust the length by pulling down the end of the belt.
2