Operation Menu - Sony HDC5500 Operating Instructions Manual

OPERATION Menu

OPERATION
Page name Item
Page No.
<VF DISPLAY> EX
01 (U04)
ZOOM
DISP
FOCUS
ND
CC
5600K
IRIS
WHITE
D.EXT
GAIN
SHUTTER
BATT
RETURN
TALK
MESSAGE
FOLLOW F
FOCUS NAME
FOCUS FORM
<'!' IND> ND
02 (U05)
CC
WHITE
5600K
GAIN
SHUTTER
FAN
EXT
Y TALLY
Settings
ON, OFF, 3S
ON, OFF, 3S
LEFT, RIGT
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ON, OFF, 3S
ALL, WRN, AT, OFF
ON, OFF, 3S
OFF, 1S, 3S, 5S, ON
NORMAL, ABS(AUTO), ABS(m),
ABS(ft)
ON, OFF
1, 2, 3, 4, 5 (combination allowed)
ON, OFF
A, B, C, D (combination allowed)
ON, OFF, ---
P, A, B (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF, ---
L, M, H (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF
AUTO1, AUTO2, MIN, MAX
ON, OFF
ON, OFF
34
Description
Valid only when a serial lens is used.
ALL: Displays all messages.
WRN: Displays warning messages and higher.
AT: Displays Auto Setup messages and higher.
Sets whether to show/hide the marker name and sets
the display time.
Sets the FOCUS display format.
NORMAL: Displayed in the range 0 to 255 (no units).
ABS(AUTO): Displayed in the units (meters or feet)
set on the lens.
ABS(m): Displayed in meters.
ABS(ft): Displayed in feet.
[IND]: Turns the '!' display area (see page 22) on/off.
[NORMAL]: Specifies the conditions under which the '!'
indication is not to be displayed even if [IND] is ON.
(By specifying the standard or normal conditions
here, non-standard or abnormal conditions can be
found with the '!' indication on the viewfinder
screen.)
Example: With the default setting of ND, the '!'
indication is displayed when an ND filter other than 1
is selected.
---: When a CCU is connected (cannot be changed)