Sony HDC5500 Operating Instructions Manual page 43

OPERATION
Page name Item
Page No.
<RETURN> RET1 SW SEL
18
RET2 SW SEL
RET3 SW SEL
RET1 SW + RET2 SW
<HEADSET MIC> INTERCOM1
19 (U11)
LEVEL
POWER
UNBAL
INTERCOM2
LEVEL
POWER
UNBAL
EARPHONE
LEVEL
<INTERCOM1> INTERCOM1 RECEIVE
SELECT
20
INTERCOM
PGM1
PGM2
PGM3
TRACKER
SIDE TONE
INTERCOM1/2
MIX TALK
Settings
CCU RET1, CCU RET2,
CCU RET3, CCU RET4
CCU RET1, CCU RET2,
CCU RET3, CCU RET4
RET1 SW, RET3 SW
DYNAMIC, CARBON, MANUAL
–60 dBu, –50 dBu, –40 dBu,
–30 dBu, –20 dBu, (–60 dBu),
(–50 dBu), (–40 dBu), (–30 dBu),
(–20 dBu)
–6, 0, 6 dB
ON, OFF, (ON), (OFF)
ON, OFF, (ON), (OFF)
DYNAMIC, CARBON, MANUAL
–60 dBu, –50 dBu, –40 dBu,
–30 dBu, –20 dBu, (–60 dBu),
(–50 dBu), (–40 dBu), (–30 dBu),
(–20 dBu)
–6, 0, 6 dB
ON, OFF, (ON), (OFF)
ON, OFF, (ON), (OFF)
ON, OFF
–34 dBu, –40 dBu, –46 dBu
SEPARATE, MIX
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
MUTE, 1 to 99, 50
SEPARATE, MIX
ENG, PROD
43
Description
Varies based on the RET1 button setting.
Varies based on the RET2 button setting.
Changes operation when you press both the RET1
button and RET2 button at the same time.
RET1 SW: The two buttons function as the RET1
button.
RET3 SW: The two buttons function as the RET3
button.
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Input gain
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Settings in ( ): With CARBON (cannot be changed)
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Input gain
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Settings in ( ): With CARBON (cannot be changed)
Sets the headset audio.
SEPARATE: Set to monaural.
MIX: Set to stereo.
When the Line select / Receive MIX select switch on
the operation panel is set to MIX, menu items ENG
and PROD appear instead of this item (the setting
values are same as this item).
Set when the MIX TALK settings of INTERCOM1 and
INTERCOM2 are the same.
SEPARATE: Set so that the INTERCOM1 and
INTERCOM2 are separately audible.
MIX: Set so that the INTERCOM1 and INTERCOM2
are audible in stereo.
When the Line select / Receive MIX select switch on
the operation panel is set to MIX, this sets the TALK
destination.