Sony HDC5500 Operating Instructions Manual page 36

OPERATION
Page name Item
Page No.
<FOCUS POSITION FOCUS POSITION
METER1> METER
06
NEAR LIMIT
FAR LIMIT
DIRECTION
SIZE
RULED LINE
INDEX COLOR
INDEX WIDTH
MARKER WIDTH
CURRENT FOCUS DIST
<FOCUS POSITION ADJUSTED SIGN
METER2>
SENSE
07
NAME DISP
FRAME DISP
FRAME WIDTH
MARKER CONFIG
[REG] MKR1, 2, 3
[DISP] MKR1, 2, 3
[COLOR] MKR1, 2, 3
[NAME] MKR1, 2, 3
[POS] MKR1, 2, 3
CURRENT FOCUS DIST
<FOCUS ASSIST> INDICATOR
08 (U03)
MODE
LEVEL
GAIN
OFFSET
AREA MARKER
SIZE
POSITION
POSITION H
POSITION V
Settings
OFF, ON
0 to 999
0 to 999
HORIZONTAL, VERTICAL
NORMAL, HALF
OFF, ON
BLACK, WHITE
1 to 5
1 to 9
1 to 5, 2
OFF, 1S, 3S, 5S, ON
OFF, 1S, 3S, 5S, ON
1 to 5, 2
Execute using ENTER.
OFF, ON
RED, GREEN, BLUE, YELLOW,
ORANGE, PURPLE, GRAY,
BLACK, WHITE
Max. 8 characters
(Default value: MARKER 1 to 3)
0 to 999
ON, OFF
BOX, B&W, COL
BTM, LEFT, TOP, RIGHT
MIN, 1 to 10, 4
QUICK, SMOOTH
0 to 99, 50
0 to 99, 50
ON, OFF
SMALL, MIDDLE, LARGE
LEFT, CENTER, RIGHT
0 to 99, 50
0 to 99, 50
36
Description
Shows/hides the focus position meter.
Sets the NEAR edge of the focus position meter.
Sets the FAR edge of the focus position meter.
Sets the display direction of the focus position meter.
HORIZONTAL: Horizontal display at the top of the
screen.
VERTICAL: Vertical display along the right edge of the
screen.
Sets the display size of the focus position meter.
Shows/hides ruled lines.
Sets the index color.
Sets the index width.
Sets the width of the marker axis portion.
Displays the current focus distance (display only).
Sets the adjustment sensitivity.
Increasing the value increases the sensitivity.
Sets whether to show/hide the marker name and sets
the display time.
Sets whether to show/hide the adjustment frame and
sets the display time.
Sets the width of the adjustment frame.
Registers a marker at the current focus position.
(Cannot be registered here if marker registration has
been assigned to a dedicated switch.)
Shows/hides markers.
(Cannot be changed here if marker registration has
been assigned to a dedicated switch.)
Sets the color of the triangular part of the marker.
Sets the text of the marker name.
See "To specify a character string" (page 24).
Sets the position of the marker.
Displays the current focus distance (display only).