System Configuration - Sony HDC5500 Operating Instructions Manual

System Configuration

Note
Production of some of the peripherals and related devices shown in the figures may have been discontinued.
For advice on choosing devices, please contact your Sony dealer or a Sony sales representative.
Connection example (optical fiber transmission)
Lens
(for ENG/EFP)
VCT-14 Tripod
Attachment
Tripod
a)
Camera hanger
HDVF-EL70
Viewfinder
Lens
(for studio camera use)
a) Supplied with HDLA1500 series (Part No.: A-1128-405-A)
b) Signal transfer up to a maximum of 2 km is possible. However, the actual transfer distance may vary depending on the
system configuration of the cameras and the type of optical fiber cables used.
c) Set the signal transmission rate for the camera to connect using the following menu item on the camera control unit.
SYSTEM CONFIG t <CAMERA I/F> t FIBER TRANSMIT RATE
For details, refer to the operation manual of the camera control unit.
HDVF-EL75/L750/L770
Viewfinder
HDVF-EL20
HDVF-EL30
Viewfinder
HDC5500
Optical fiber cable
USB drive
CAC-6 Return Video
Selector
Intercom headset
CAC-12
Microphone Microphone
Holder
HDC5500
USB drive
CAC-6 Return Video
Selector
Intercom headset
Microphone
HDLA1500-series Large
Lens Adaptor
BKP-7911 Script Holder
Sync signal input
Return video input
Intercom
microphone
input
b)
HDCU5500
Camera Control Unit
Hub
MSU-1000 series
Master Setup Unit
4
4K video
monitor
CCA-5
RCP-1000 series or
later
Remote Control Panel
c)
Video
monitor
Video router
Waveform
monitor