Maintenance And Care - Windsor Saber Blade 12 Owner's Manual

Set main switch for brush/vacuum
operation to "0".
Swivel the appliance handle forward
and arrest in the park position.
Disconnect the main plug from the
socket.
Emptying the recovery tank
Note
If the recovery tank is full the float clos-
es the suction channel. The suction op-
eration is interrupted. Empty the
recovery tank.
Warning
Please observe the local provisions re-
garding the wastewater treatment.
Turn off the machine.
Position the appliance upright and
arrest it in the park position.
Remove the solution tank from the
appliance.
Swivel support bow downward and
remove the recovery tank.
Lift the lock and remove the lid of the
recovery tank.
Pour out dirt water.
Rinse the recovery tank with clear
water.
Replace the lid of the recovery tank
and lock it.
Insert the recovery tank into the ap-
pliance.
Emptying the solution tank
Remove the solution tank from the
appliance.
Open the cover of the solution tank.
Pour out the cleaning liquid.
Close the cover of the solution tank.
Insert the solution tank into the appli-
ance.
Transport
Swivel the appliance handle forward
and arrest in the park position.
Swivel the pushing handle back-
wards and push the appliance.
or
Lift appliance by the carrying handle
and carry it.

Maintenance and care

Danger
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.
Warning
Risk of damage to the appliance on ac-
count of water leakage. Empty the
waste water reservoir and the fresh wa-
ter reservoir prior to performing mainte-
nance on the appliance.
9
English