Environmental Protection; Control Elements; Initial Startup - Windsor Saber Blade 12 Owner's Manual

The application temperature ranges
from 41°F1 to 104°F (+5°C to
+40°C).
The appliance is not suited for the
–
cleaning of frozen surfaces (e.g. in
cold stores).
The appliance may only be equipped
–
with original accessories and spare
parts.
The appliance was designed for the
–
cleaning of floors inside or covered
surfaces.
The appliance is not intended for the
–
cleaning of public traffic routes.
The appliance is not suited for the
–
use in potentially explosive environ-
ments.

Environmental protection

The packaging materials
are recyclable. Please do
not throw packaging in the
domestic waste but pass it
on for recycling.
Old units contain valuable
recyclable materials. Batter-
ies, oil and similar substanc-
es may not be released into
the environment. Therefore
please dispose of old units
through suitable collection
systems.

Control elements

Figure 1, see cover page
1 Handle
2 Water pump switch
3 Main switch for brushing/vacuuming
operations
4 Carrying handle
5 Support bow in recovery tank
6 Recovery tank
7 Solution tank
8 Cleaning head
9 Squeegee lift pedal
10 Release, park position
11 Suction tube
12 Suction tube connection
13 Cylindrical brush
14 Squeegee
15 Unlocking button for the changeable
brush
16 Cover recovery tank
17 Lock
18 Cable hook, rotating
19 Mains cord with mains plug

Initial startup

Figure 2, see inside cover page
Insert tube into the opening of the
appliance at the end of the handle.
Press down and slide the handle into
the appliance until it clicks.
7
English