Siemens SIMATIC ET 200SP Manual page 16

Product overview
Properties
The module has the following technical properties:
● Analog input module with 2 inputs
● Measurement type voltage of 4-wire and 6-wire strain gauges (full bridges)
4.85 VDC supply voltage of full bridge
● Input ranges
– ± 0.5 ... 320 mV/V, resolution 28 bits including sign
– 16-bit oversampling including sign
● Electrically isolated from supply voltage L+
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two high and two low limits per
channel)
The module supports the following functions:
● Firmware update
● I&M identification data
● Reconfiguration in RUN
● PROFIenergy
● Isochronous mode
● Oversampling
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Reference identification label
● Shield connector
See also
You can find more information on accessories in the ET 200SP distributed I/O system system
manual.
14
Analog input module AI 2xSG 4-/6-wire HS (7MH4134-6LB00-0DA0)
Manual, 09/2018, A5E41867508A-AB