Wiring Of Single Mbp (Basic Version) - Eaton 9SX Series Manual

3.2 Wiring of single MBP (Basic version)

Single MBP (Basic version) terminal block(TB) layout as below:
Note:
1. AC input TB: N/N/mL1/ bL1/ mL2/bL2/ mL3/bL3/PE ('m' is main input,'b' is
bypass input)
2. AC segment 1 (Not programmable): PE/N/N/L1/L2/ L3
3. UPS input TB: PE/N/N/L1/L2/L3
4. UPS bypass TB: L1/L2/L3
5. UPS output TB: N/N/L1/L2/L3
Single MBP (basic version) is the same wiring as single MBP (standard version).
Also provide 8 modes of wiring application for MBP input/output. Please select one
mode for your actual application with below 'copper busbar ' and 'Mode-setting
label'.
During the wiring process, it is only necessary to remove the 'top cover of the
terminal block' without removing 'terminal block box'.
Copper
busbar
73
Item Quantity(PC)
1 5
3 2
Figure