Wiring Of Single Mbp (Standard Version) - Eaton 9SX Series Manual

3.1 Wiring of single MBP (Standard version)

Single MBP (Standard version) terminal block(TB) layout as below:
Note:
1. AC input TB: N/N/mL1/ bL1/ mL2/bL2/ mL3/bL3/PE ('m' is main input,'b' is bypass input)
2. AC segment 1 (Not programmable): PE/N/N/L1/L2/ L3
3. AC segment 2 (Programmable): N/N/L1/L2/ L3/ PE
4. UPS input TB: PE/N/N/L1/L2/L3
5. UPS bypass TB: L1/L2/L3
6. UPS output TB: N/N/L1/L2/L3
Below will introduce 8 modes of wiring application for MBP input/output. Please
select one mode for your actual application with below 'copper busbar ' and
'Mode-setting label'.
During the wiring process, it is only necessary to remove the 'top cover of the
terminal block' without removing 'terminal block box'.
Item
Copper
busbar
Quantity(PC)
1 6
3 2
Figure
62