Eaton 9SX Series Manual page 71

Mode 3-3(single source)

1. Input:
connect mian-ground cable (PE) to chassis first;
short 'AC input terminal N/N' with 'busbar #1', then connect AC cable(N);
short 'AC input terminal mL1/bL1' with 'busbar #1', then connect AC cable(L1);
short 'AC input terminal mL2/bL2' with 'busbar #1', then connect AC cable(L2);
short 'AC input terminal mL3/bL3' with 'busbar #1', then connect AC cable(L3);
2. Output:
connect ground cable (PE) to chassis first;
short '
AC segment
connect '
AC segment
3. Connect to UPS:
Remove all the busbar of the UPS, then connect the UPS to MBP with '
MBP accessory
UPS1' in
terminal N/N' with 'buabar #1', then connect AC cable(N);
terminal L1/L2/L3' to AC cable(L1/L2/L3).
.
Cable to
66