Siemens SINUMERIK 840D sl Configuration Manual page 176

Safety configuration
10.3 Changing the Safety Integrated mode
Procedure
To change the Safety Integrated mode, proceed as follows:
1. Click the NCU in the network or device view and select the "Safety Integrated" entry in the
"Properties" inspector window at "General".
Figure 10-3
2. Click the "Change Safety Integrated mode" button.
The "Change Safety Integrated mode" dialog opens. If you select an option, the effects of
the mode change are performed here.
Figure 10-4
3. Select the required Safety Integrated mode and confirm the reconfiguration with "Yes".
176
Properties inspector window - Safety Integrated when using NCU V4.7
"Change Safety Integrated mode" dialog when using NCU V4.7
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA