KYMCO XCITING S 400 Manual page 33

2.Periodic Maintenance
Caliper
Place a suitable container under the banjo bolt to catch any remaining
brake fluid. Remove the banjo bolt that holds the brake hose to the caliper
using a 12 mm socket. Discard the two sealing washers.
The brake calipers are each mounted to the front fork with two bolts.
Remove the two caliper mounting bolts with a 12 mm socket. Discard the
brake caliper mounting bolts.
Remove the brake caliper from the fork leg.
When installation:
XCITING S 400
9-13