KYMCO XCITING S 400 Manual page 296

XCITING 400i / XCITING S 400
8. Final Drive
Inspection
Place the vehicle on its center stand on level ground.
Remove the transmission oil level check bolt with a 12 mm
socket. The oil level is correct when oil flows from the bolt hole.
Install the oil level check bolt and tighten it to specification with a
12 mm socket.
Torqu
Item Qty Thread size (mm)
kgf-m lb-ft
Final Drive oil
1 8 0.8 - 1.2 5.79 - 8.68
check bolt
If the level is too high allow the oil to flow out of the check hole until the
level is even with the bolt hole.
If the level is low add more of the same type and brand of oil as shown
below. Inspect for leaks.
8‐4