KYMCO XCITING S 400 Manual page 106

XCITING 400i
3. Engine > Camshaft
Wipe the rocker arm shafts clean. Insert the rocker arm shafts
through the camshaft holders and rocker arms. Install the rocker
arm shafts so that the end sits as shown.
Install the camshaft set plate so it fits into the groove on the
camshaft and between the projections on the rocker arm shafts.
Apply a small amount of blue Loctite (non-permanent) to the
threads of the set plate bolt. Thread in the bolt and tighten it to
specification with a
5 mm Allen socket.
3‐28