Omron E5GN Manual page 8

Dimensions
Note: All units are in millimeters unless otherwise indicated.
p
40 min.
48
35 24
44.8
Panel Cutout
Mounted Separately
+0.6
45
0
+0.3
22
0
3
(36.8)
*When carrying out maintenance on the E5GN, only the terminal plate
can be drawn out with the terminal leads still attached.
22
Group Mounted
(48 × number of units -2.5)
Mounting separately does not allow waterproofing.
• Insert the Controller through the hole in the panel from the front and push
the adapter on from the rear. Push the adapter up to the back of the panel
ensuring that the controller is pushed all the way in, removing any gap
between the Controller, panel, and adapter. Finally, use the two screws on
the adapter to secure the unit in place.
• To mount the E5GN so that it is waterproof, insert the waterproof packing
onto the E5GN.
• When two or more E5GN Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature given in the specifications.
Digital Temperature Controllers
100
+1.0
0
+0.3
22
0
E5GN
22
7