Enter Heating Program - White Rodgers 1F91-71 Operation Manual

5. Press SET once. The display will show the
DAY
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
RUN
7. Press once. The display will show the
PRGM
correct time and room temperature alter-
nately.

Enter Heating Program

During programming, if you don't press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume
24
TIME TIME
or until you
FWD BACK
programming after this happens, press
until you are at the point where you stopped
programming. Then you may continue to enter
your programs normally. If you want to stop
programming at any time, simply press
resume program operation.
SYSTEM
1. Press
SWITCH
VIEW
2. Press once. 5 DAY (indicating week-
PRGM
day program), and MOR, representing
the morning heating period, will appear
in the display. Also displayed are the
currently programmed start time for the
MOR period and the currently programmed
temperature.
EXAMPLE:
5 DAY
until HEAT is displayed.
VIEW
PRGM
RUN to
PRGM