White Rodgers 1F91-71 Operation Manual page 25

This display window shows that for the
weekday MOR period, the start time is 5:00
AM, and 70 is the programmed tempera-
ture (this example reflects factory prepro-
gramming).
3. To change the displayed start time to your
selected start time for weekday MOR heat
program, press
lected time appears. The time will change in
15 minute increments.
4. Press or
selected weekday MOR heating tem-
perature.
5. If you want the fan to run continuously
during this period, press
FAN is displayed.
TIME TIME
or until your se-
FWD
BACK
until you reach your
FAN
SWITCH
VIEW
6. Press
PRGM
time and heating temperature for weekday
DAY will be displayed.
7. Repeat steps 3 through 5 to select the start
time and heating temperature for the week-
day DAY program.
8. Repeat steps 3 through 7 for the weekday
EVE and NHT heating programs.
9. After entering your weekday heating pro-
gram, repeat steps 1 through 8 for your
weekend programming (keep in mind that
for weekend programming, the display
should be changed from 5 DAY to 2 DAY).
10. When you have completed entering your
heating program, press
until
. The currently programmed start
RUN .
PRGM
25