Table of Contents
Advertisement
3. Press VIEW PRGM once. "MO TU WE TH FR" (indicating
weekday program) will appear in the display. Also dis-
played are the currently programmed start time for the 1st
heating period and the currently programmed tempera-
ture (flashing).
MO TU WE TH FR
AM
EXAMPLE:
This display window shows that for the 1st weekday period,
the start time is 6:00 AM, and 68 is the programmed
temperature (this example reflects factory preprogramming).
4. Press
or
to change the displayed temperature to your
selected temperature for the 1st heating program period.
5. Press SET TIME once (the programmed time will flash).
Press
or
until your selected time appears. The time
will change in 15 minute increments. When your selected
time is displayed, press SET TIME again to return to the
change temperature mode.
6. Press VIEW PRGM once. The currently programmed start
time and setpoint temperature for the 2nd heating program
period will appear.
7. Repeat steps 4 and 5 to select the start time and heating
temperature for the 2nd heating program period.
8. Repeat steps 4 through 6 for the 3rd and 4th heating program
periods. Weekday heating programs are now complete.
9. Press VIEW PRGM once. "SA SU" (indicating weekend
program) will appear in the display, along with the start time
for the 1st heating period and the currently programmed
temperature.
10. Repeat steps 4 through 8 to complete weekend heating
programming.
11. When you have completed entering your heating program,
press RUN PRGM.
Enter Cooling Program
!
If the outside temperature is below 50 F, disconnect
power to the cooling system before programming.
Energizing the air conditioner compressor during
cold weather may cause personal injury or property
damage.
1. Move SYSTEM switch to COOL position.
2. Follow the procedure for entering your heating program,
using your selected cooling times and temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one
final time before beginning thermostat operation.
1. Move SYSTEM switch to HEAT position.
2. Press VIEW PRGM to view the 1st weekday heating period
time and temperature. Each time you press VIEW PRGM,
the next heating period time and temperature will be dis-
played in sequence for weekday, then weekend program
periods (you may change any time or temperature during this
procedure).
3. Press RUN PRGM.
4. Move SYSTEM switch to COOL position.
5. Repeat step 2 to check cooling temperatures.
6. Press RUN PRGM to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY PRO-
GRAMMED AND READY TO AUTOMATICALLY PROVIDE
MAXIMUM COMFORT AND EFFICIENCY!
CAUTION
7
Hide quick links:
Advertisement
Table of Contents
