Entering Your Program; Set Current Time And Day - White Rodgers 1F91-71 Operation Manual

ENTERING YOUR PROGRAM

Follow these steps to enter the heating and
cooling programs you have selected.
NOTE
We recommend that you remove the thermo-
stat from the wall for programming (especially
for entering cooling programming). A fresh 9
®
volt Energizer alkaline battery must be in-
stalled to perform off-wall programming. BE
SURE SYSTEM SWITCH IS SET TO OFF
POSITION BEFORE REATTACHING THER-
MOSTAT TO SUBBASE!
NOTE
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.

Set Current Time and Day

1. Press SET once. The display will show
CLOCK
minutes only.
EXAMPLE:
2. Press and hold either
reach the correct minutes.
3. Press SET once. The display window will
CLOCK
show the hour only.
EXAMPLE:
4. Press and hold either
reach the correct hour and AM/PM desig-
nation (AM begins at midnight; PM begins
at noon).
TIME TIME
or until you
FWD
BACK
TIME TIME
or until you
FWD
BACK
23