Device Care
Avoid chemical cleaners, solvents,
and insect repellents that can
damage plastic components and
finishes.
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it
can cause permanent damage.
The device is water resistant to
IEC Standard 60529 IPX7. It can
withstand accidental immersion in
1 meter of water for 30 minutes.
Prolonged submersion can cause
damage to the device. After
submersion, be certain to wipe dry
and air dry the device before using
or charging.
Cleaning the Device
1 Wipe the device using a cloth
2 Wipe it dry.
11111111
NOTICE
dampened with a mild detergent
solution.
II
.
cp
.
Troubleshooting
Resetting the Device
If the device stops responding, you
may need to reset it. This does not
erase any of your data or settings.
1 Remove the batteries.
2 Reinstall the batteries.
Restoring All Default Settings
You can reset all settings back to
the factory default settings.
Select Setup > Reset > Reset
All Settings > Yes.
50
.
cp
.
111111