Download Print this page

Garmin GPSMAP 620 Quick Reference Manual

Garmin gpsmap 620: quick start
Hide thumbs Also See for GPSMAP 620:

Advertisement

Automotive Mode: Understanding Your GPSMAP 620/640
Note: North American maps are preloaded on the GPSMAP 640. To use the automotive functions
of the GPSMAP 620, the GPSMAP 620 Automotive Kit is required.
GPS satellite strength.
Usage mode. Touch this icon to change modes.
Battery status.
Current time. Touch to change time settings.
Touch to find a destination.
Touch to view the map.
Touch to adjust the volume.
Touch to use the tools such as Settings and Custom Routes.
Automotive Mode: �inding Your �estination
�inding Your �estination
Your �estination
The Where To? menu provides several different categories for you to use when searching for
addresses, cities, and other locations. The detailed maps (either preloaded to your GPSMAP 640
or optionally loaded to your GPSMAP 620) contain millions of points of interest, such as
restaurants, hotels, and auto services.
1. Touch
Where
To?.
2. Select a category.
3. Select a subcategory.
4. Select a destination.
5. Touch Go!.
tip: Touch
and
to see more choices.
Automotive Mode: Adding a Stop
You can add a stop (called a Via Point) to your route. The GPSMAP 620/640 gives you
directions to the Via Point and then to your final destination.
1. With a route active, touch
2. Search for the extra stop.
➌ ➍
➌ ➍
3. Touch Go!.
4. Touch
Add as Via Point
�estination
Automotive Mode: Taking a �etour
1. With a route active, touch Menu.
2. Touch �etour.
Automotive Mode: Menu page
Automotive Mode: Menu page
The GPSMAP 620/640 attempts to get you back on your original route as quickly as possible.
If the route you are currently taking is the only reasonable option, the GPSMAP 620/640
might not calculate a detour.
Automotive Mode: Stopping the Route
1. With a route active, touch Menu.
2. Touch Stop.
Automotive Mode: Adjusting the Volume
From the Menu page, touch Volume. Touch and to adjust the volume. Touch the box
next to Mute to mute all audio.
Automotive Mode: Setting a Home Location
Set your home location for the place you return to most often.
1. Touch
Where To?
2. Select an option:
Enter your address.
Use your current location.
Choose from a list of recently found locations.
Automotive Mode: Going Home
To navigate home after you have set your home location, touch Where to? > Go
Menu
>
Where
To?.
to add this stop before your destination. Touch
Set as New
to make this your final destination.
>
Go
Home.
GPSMAP
quick reference guide
Home.
620/640
®

Advertisement

loading

Summary of Contents for Garmin GPSMAP 620

  • Page 1 Automotive Mode: Understanding Your GPSMAP 620/640 Note: North American maps are preloaded on the GPSMAP 640. To use the automotive functions of the GPSMAP 620, the GPSMAP 620 Automotive Kit is required. ➊ GPS satellite strength. ➊ ➊ ➋ ➋ ➋ Usage mode. Touch this icon to change modes. ➌ Battery status. ➎ ➎ ➍ Current time. Touch to change time settings. ➎ Touch to find a destination. ➐ ➐ ➏ Touch to view the map. Automotive Mode: Menu page Automotive Mode: Menu page ➐...
  • Page 2 2. Fit the bottom of the device into the cradle. 3. Tilt the device back until it stops. 4. Flip down the locking tab to hold the device in the mounting bracket. To remove the GPSMAP 620/640 from the mounting bracket: Placing the Placing the 1.

This manual is also suitable for:

Gpsmap 640