System Settings; Serial Interface Settings - Garmin GPSMAP 64s Owner's Manual

Vertical Speed: The rate of ascent
Vertical Speed To Dest: The
Waypoint At Dest: The last point
Waypoint At Next: The next

System Settings

Select Setup> System.
Satellite System: Sets the
WAAS/EGNOS: Enables the
11111111
be navigating for this data to
appear.
or descent over time.
rate of ascent or descent to a
predetermined altitude. You
must be navigating for this data
to appear.
on the route to the destination.
You must be navigating for this
data to appear.
point on the route. You must
be navigating for this data to
appear.
satellite system to GPS, GPS
+
GLONASS , or Demo Mode
(GPS off).
system to use Wide Area
Augmentation System/
European Geostationary
II
. cp .
Navigation Overlay Service
(WAAS/EGNOS) data. For more
information about WAAS, go to
Garmin.com/aboutGPS/waas.
html.
Language: Sets the text language
on the device.
NOTE: Changing the text
language does not change the
language of user-entered data
or map data, such as street
names.
Interface: Sets the format of the
serial interface
Settings).
AA Battery Type: Allows you to
change they type of AA battery
you are using.
NOTE: This setting is disabled
when the NiMH battery pack is
installed.

Serial Interface Settings

Select Setup > System >
Interface.
Garrnin Spanner: Allows you to
use the device USB port with
most NMEA 0183-compliant
37
. cp .
111111
(Serial Interface