Updating Maps And Software Using A Wi-Fi Network; Device Care; Cleaning The Touchscreen; Restarting The Device - Garmin TREAD Owner's Manual

Updating Maps and Software Using a Wi‑Fi Network
Map and software updates may require the device to download large files. Regular data limits or charges from
your internet service provider apply. Contact your internet service provider for more information about data
limits or charges.
You can update the maps and software by connecting your device to a Wi‑Fi network that provides access to the
internet. This allows you to keep your device up to date without connecting it to a computer.
1 Using the included USB cable, connect the device to external power.
NOTE: A USB power adapter is not included. Go to the product page on
adapter accessory.
2 Connect the device to a Wi‑Fi network
While connected to a Wi‑Fi network, the device checks for available updates automatically and displays a
notification when an update is available.
3 Select an option:
• When an update notification appears, swipe down from the top of the screen, and select An update is
available..
• To manually check for updates, select
The device displays available map and software updates. When an update is available, Update Available
appears below Map or Software.
4 Select an option:
• To install all available updates, select Download.
• To install only map updates, select Map.
• To install only software updates, select Software.
5 If necessary, read the license agreements, and select Accept All to accept the agreements.
NOTE: If you do not agree with the license terms, you can select Reject. This stops the update process. You
cannot install updates until you accept the license agreements.
6 Keep the device connected to external power and within range of the Wi‑Fi network until the update process
is complete.
NOTE: If a map update is interrupted or canceled before it completes, your device may be missing map data. To
repair missing map data, you must update the maps again.

Device Care

Avoid dropping your device.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Never use a hard or sharp object to operate the touchscreen, or damage may result.

Cleaning the Touchscreen

1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect the device from power.
4 Gently wipe the screen with the cloth.

Restarting the Device

You can restart your device if it stops functioning.
Select > Personal > Device Reset > Restart Device.
Device Maintenance
NOTICE
(Connecting to a Wireless Network,
> Updates.
NOTICE
garmin.com to purchase a power
page 44).
47