Installing The Nimh Battery Pack; Charging The Battery Pack - Garmin GPSMAP 64s Owner's Manual

Contact your local waste disposal
department to properly recycle the
batteries.
Alkaline batteries lose a significant
amount of their capacity as the
temperature decreases. Use lithium
batteries when operating the device
in below freezing conditions.
Installing the NiMH Battery
Pack
The device operates using the
optional NiMH battery pack
(purchased separately) or two AA
batteries
1 Turn the D-ring counter-
2 Locate the battery pack
ffi
CAUTION
NOTICE
(Installing Batteries).
clockwise, and pull up to
remove the cover.
3 Insert the battery pack,
observing polarity.
4 Gently press the battery pack
into place.
5 Replace the battery cover, and
turn the D-ring clockwise.

Charging the Battery Pack

To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area
before charging or connecting to a
computer.
Do not attempt to use the device
to charge a battery that was not
provided by Garmin®. Attempting
to charge a battery that was not
provided by Garmin can damage
the device and void the warranty.
Before you can connect the straight
<D.
connector of the USB cable to your
device, you may have to remove
optional mount accessories.
NOTE: The battery will not
charge when outside the
10
NOTICE