Set-up and Initial Commissioning
8
Initial start-up
.04
● Inspect the machine, particularly the electric cables, for any damage.
● Clean the machine thoroughly and then oil it, see also Chapter 10 Maintenance and
● Arrange for technical staff to check whether the machine's motor may be operated at the
8
Switching the machine on / off
.05
● Switch the machine on ( see Chapter 7.01 Main switch ).
8
Machine drive home position
.06
● See Chapter 4.4 of the drive service manual
22
Care.
existing mains voltage and whether it is connected properly.
Never operate the machine if there are any differences.
The machine must only be connected to a grounded socket!
Arrange for the home position of the machine drive to be verified by certified
technicians before the initial start-up! Arrange for settings to be carried out by
technicians where required (see Chapter 4.4 of the drive service manual.