Samsung AF HV Series User & Installation Manual page 59

S/W Control type
13
times
Short press
14
K4
times
15
times
Press and hold 1 time
2
Short press
times
3
Short press
times
❇ Press and hold the K4 button (Main MICOM version)
version)
❇ Condition for defrost trial operation
- Condition 1: Outdoor temperature below 10 °C
- Condition 2: All temperature condition must meet the defrost condition
3. DIP switch option
Switch 1
Switch 2
Switch 3
Switch 4
❇ When the snow prevention control is in use, eco mode (standby mode) will not operate.
Item
Protection control
Temperature of heat
insulating board (°C)
S/W check details
Main MICOM version
Inverter MICOM version
EEPROM version
Press it shortly once again
On (Default)
Auto address setting
-
Disable snow prevention control
-
ENGLISH-59
Display
SEG1 SEG2 SEG3
Protection control
0: No protection
control
0: Cooling
1: Frozen
1: Heating 2: Non-stop defrost
3: Overload
4: Discharge
5: Full current
100 unit 10 unit
-
Year Month
Day (10 unit)
(Hex) (Hex)
Year Month
Day (10 unit)
(Hex) (Hex)
Year Month
Day (10 unit)
(Hex) (Hex)
Press it shortly once again (E2P
Manual address setting
Enable snow prevention control
SEG4
Frequency status
0: Normal
1: Hold
2: Down
3: Up_limit
4: Down_limit
Single unit
- -
Day (single unit)
Day (single unit)
Day (single unit)
Off
-
-