Samsung AF HV Series User & Installation Manual page 39

Outdoor unit installation
1. To prevent vibration and noise, fix the outdoor unit firmly and check that base ground is hard enough and has no
slopped surface. (Fix the outdoor unit with M10 bolts, nuts and washer.)
2. Appropriate length of the bolt must be over 20 mm from the surface of the ground.
3. When constructing base ground, it must support the outdoor unit within below dimensions.
Outdoor unit base mount and anchor bolt position
Anchor bolt position
AF30HV Series
4. If you need to ensure the outdoor unit from falling, use wires to fix it firmly.
- Loosen the 4 screws from the top cover of the outdoor unit.
- Put the wire around the screws and fasten the screws.
- Fix the wire on the ground.
• When the outdoor unit is not firmly fixed, it may fall and cause
personal injury or property damage.
CAUTION
• When the outdoor unit is installed in water-proofed rooftop, fix
the wires on the wall.
660
880
ENGLISH-39
Anchor bolt position
AF50HV Series
(Unit: mm)
620
940