Samsung AF HV Series User & Installation Manual page 33

Installing the unit
IMPORTANT : When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant tubes.
Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product appears
damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the
authorized technician has collected the material from the retailer).
After completing the installation, always carry out a functional test and provide the instructions on how to operate the air
conditioner to the user.
Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames
to avoid the occurrence of fires, explosions or injuries.
Our units must be installed in compliance with the spaces indicated in the manual to ensure either accessibility from
both sides or ability to perform routine maintenance and repairs. The units' components must be accessible and that can
be disassembled in conditions of complete safety either for people or things. For this reason, where it is not observed as
indicated into the manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations
in force) with slings, trucks, scaffolding or any other means of elevation won't be considered in-warranty and charged to
end user.
ENGLISH-33