Samsung AF HV Series User & Installation Manual page 42

Installing the air conditioner
Electrical work
Wiring work must be done by the certified expert.
Wiring work should be performed in accordance with related laws such as technical specification on electric installation
or installation guide.
You must install exclusive power supply.
- If you use multi-outlet, there is a risk of electric shock or fire.
- After initial installation, customer is responsible for re-installation fee.
Please install a circuit breaker. (Rated current sensitivity over 30 mA)
- After initial installation, customer is responsible for re-installation fee.
Tightening torque of the screws on the terminal block should be within the rated range and make sure that they don't
get loosened.
Please connect ground wire.
❇ Please install the power wire with it length shorter than 50 m. If the length of the power wire exceeds 50 m inevitably,
product may not work or wire could get damaged. Therefore please contact the system expert.
Power specification
Wiring standards
Classification
Model name
Power supply
Power consumption
Operating current
Capacity of circuit breaker
Thickness of ground wire
Indoor and outdoor unit power wire
Indoor and outdoor unit communication
wire
Power wire
Product
• Power supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed
flexible cord. (Code designation IEC:60245 IEC 66 / CENELEC: H07RN-F)
NOTE
Indoor unit
Outdoor unit
Product
Cooling W
Cooling A
Product A
mm 2
mm 2
2
mm
Type
2
Below 20 m mm
2
20 m or over mm
ENGLISH-42
AF30HV Series
AF30HVFMAWKNGA
AF30HVFMAWKXGA
Single phase 220 - 240 V, 50 Hz
2,490
11.3
30
3.5
At least equal to H07RN-F
4.0 (Should be purchased
separately)
6.0 (Should be purchased
separately)
AF50HV Series
AF50HVFMAWKNGA
AF50HVFMAWKXGA
3 phase 4 wires 380 - 415 V, 50 Hz
4,850
7.4
20
4.0
0.75
0.75
2.5 (Should be purchased
separately)
4.0 (Should be purchased
separately)