Advertisement
Available languages
Available languages
Dimensions are approximate.
Unit: mm
95
654
965 - 1676
60
920
C L of Outlet
305
Rough-in - Wall Mount Electrical and Water Supply
NOTICE: The locations for the supply shut-off, electrical outlet, and docking station cord are suggested
locations. Make sure all installations adhere to applicable codes and standards.
NOTICE: Locating the supply stop behind the toilet will make it difficult to remove the back panel.
IMPORTANT! Do not install any items behind the toilet that will interfere with the lid when it is raised.
All decorative items should be at least 94 cm high to allow clearance for the seat.
The remote docking station is equipped with a 5 meter power cord.
¨
The supplied power cord is 1422 mm in length. Install the GFCI protected outlet within 1422 mm of the toilet
¨
location.
The toilet is equipped with a motion sensor to automatically open the lid when movement is sensed.
¨
Sensitivity can be adjusted using the User Interface.
The toilet is equipped with a motion sensor to automatically open the ring when the light is interrupted.
¨
The sensor is located on the right side of the toilet. This sensor has a maximum range of 20 cm. Keep this area
free of obstructions.
1/2" OD compression supply stop outlet is required unless an adapter is used.
¨
Kohler Co.
Side Signal Sensor Field
Front Signal Sensor Field
368
151
Remote Dock
104
1041-1676
397
Front of Bowl
275
230
336
41
305
Power Cord
Reaches
Dock Power
1422
Cord
1/2"
Supply
152 102
203 51
5
Finished Wall
454
Outlet
GFCI Protected Receptacle
1195109-X2-A
Advertisement
