Kohler K-3900X-2 Installation Manual page 13

Install the Toilet (cont.)
Secure the Toilet
Insert the bushing into the screw hole in the side of the toilet.
¨
Insert the supplied screws into the screw holes.
¨
NOTE: A ratchet style screwdriver is the most effective tool when tightening the screws due to their close
proximity to the floor. It is difficult to achieve enough force with a standard screwdriver. There is a greater
risk of stripping the screws when a drill is used.
Thread each screw into the mounting blocks. Tighten the screws evenly to maintain the correct toilet position.
¨
Install the caps over the screw holes.
¨
Install Battery Box
Pull out the connecting wire under the battery box.
¨
Press the buckle and pull it down, and take out the battery box from the rear panel (as shown in figure).
¨
Unscrew the screw with a cross screwdriver and remove the battery box cover.
¨
Eight AA batteries are loaded correctly according to the mark on the battery box.
¨
Tighten the screw on the battery box cover.
¨
Insert the battery box properly into the slot according to the mark on the battery box cover, and push the
¨
battery box until it is clamped.
Kohler Co.
Battery
Box Slot
Battery
Box
Buckle of
Battery Box
13
Screw
Battery Box
Cover
1195109-X2-A