Table of Contents
Advertisement
[16]
Zone Bypass Mask
If the zone light is ON, the zone can be bypassed using the [
it cannot be bypassed.
Default
ON
Zone Light 1
ON
Zone Light 2
ON
Zone Light 3
ON
Zone Light 4
ON
Zone Light 5
ON
Zone Light 6
[17]
System Times
Default
0 3 0
1 2 0
0 0 4
0 3 0
0 5 0
0 3 0
Valid entries are "001" to "255". Do not enter "000".
[18]
Auxiliary Delay Loop Entry / Exit Times
Default
0 4 5
1 2 0
Valid entries are "001" to "255".
[19]
System Clock Times
Default
9 9 9 9
9 9 9 9
Enter 4 digits - "00" to "23" hours; "00" to "59" minutes. If a feature is not used, leave at the default setting of "9999".
24
Page 14
Page 14
Entry Delay (seconds)
Exit Delay (seconds)
Bell Cut-off (minutes)
AC fail transmission delay (minutes)
Slow loop response time ( x 10 ms)
Test transmission cycle or auto download cycle time (days)
Do not enter "000".
Do not enter "000".
Do not enter "000".
Do not enter "000".
Entry Time (seconds)
Exit Time (seconds)
Page 15
Automatic Arming (time of day)
Test transmission or auto download (time of day)
∗
][1] command. If a zone is defined as a fire zone,
Page 15
PC1510 Version 4.1
Advertisement
Table of Contents
