Advertisement
Boiler for heating water in the system. Highest temperature of outgoing water is 85
pressure at lowest point of heating system – 1,5 bar. Technical data is presented in additional table and instructions can
be found in rated data plate. Parts of pellet boiler:
1. Decoration of boiler.
2. Burner of pellets.
3. Pipe of heated water.
4. Pipe of returning water.
5. Heat exchanger, with flowing water inside of it.
6. Thermal insulation layer made from mineral wool.
7. Turbulator.
8. Cleaning cover – for cleaning of turbulator's surface.
9. Safety valve 1,5 bar (left-hand thread).
10. Thermometer.
11. Pellet hopper.
12. Smoke discharge vent.
13. Bottom.
14. Forks – for stopping falling pellets.
15. Cover.
2.2 Pellet boiler
O
C, and allowed operational
Advertisement
