Using A Headset; Menu Structure With Headset Logged In; Download - Avaya T3 Service Manual

Connected to ip office

Hide thumbs Also See for T3:

Table of Contents

Links (from IP Office 3.2 and higher)

Using a headset

A headset can be connected by means of the handset connector, at the headset

interface of a link or directly to the headset socket of the T3 IP Compact.

The telephone cannot determine whether a headset is plugged in or not. Therefore, you

have to log it in at the telephone (see user manual T3 IP).

Note:

•

After unplugging the headset, the user has to log it out from the telephone if

the telephone is to be used without the headset.

•

The headset interfaces in the links and in the T3 IP Compact have the same

functions.

If a headset link is connected, the menu item "Headset" is displayed in the Main menu.

This depends on whether a headset has been connected or not.

After selecting this menu item via the "OK" key, the display changes to the menu

"Settings > Display/Acoustics > Acoustics/Contrast".

Here you will find the new menu items "Headset (off)" and "Headset vol.".

The headset can be activated via the menu item "Headset (off)". The headset volume is

set via the menu item "Headset vol.".

The easiest way to activate and deactivate the headset is to assign a function key with

"Headset".

Since the headset link does not contain any software, no download is necessary.

Table of Contents