Infrared Service Area; Operation - Taiden TES-5604 Series Installation And Operating Manual

3.3 Infrared service area

Infrared light is directional invisible light. Infrared wireless
microphone gets best sensitivity when it directly faces a
receiver. The infrared glass on TES-560x series digital
infrared wireless microphone is designed to be at its best
position to guarantee maximum emission angle and to
ensure the most effective infrared signal transmission.
The vertical transmission angle is 90°, the horizontal
transmission angle is 120°.
Figure 3.2 Coverage area of TES-560x

3.4 Operation

The TES-560x series digital infrared wireless microphone
combines speaking, working mode setting, volume
control and control PPT slide all in one. Other peripheral
devices like external microphone, MP3 player and so on
can also be connected to implement more comprehensive
functions.
1. Mic. On/Off and frequency channel selection

Press the microphone on/off button to power on and
turn on the microphone, the BAT indicator will
indicated battery status:
Battery status
Enough
Lack

Press the microphone on/off button to close the
microphone.

TES-5604 offers 4 frequency channels: 1.0 MHz,
1.67 MHz, 2.33 MHz and 3.0 MHz.
Frequency channel selection:
a. Press and hold simultaneously the "..."/"F" and
microphone on/off buttons for more than 2 seconds.
All signal indicators on the microphone shall cycle
flashed two times when entering frequency selection
mode, with the default frequency channel is the last
used;
b. Select a frequency channel by pressing the "..."/"F"
button. Different number of signal indicators indicates
different frequency channel:
Number of
indicators
0
1
2
3
4
c. Press the microphone on/off button to save and the
corresponding indicator(s) will blink;
d. Mic will power off automatically and please reboot it
to apply the frequency channel.
36
Indicator
Off
Red (flash)
TES-5604 TES-5605/5606
series series
-- 1.0 MHz
1.0 MHz 1.67 MHz
1.67 MHz 2.33 MHz
2.33 MHz 3.0 MHz
3.0 MHz --