Tes-5683M+Tes-5683Bx Series; Tes-5683M+Tes-5684Bx - Taiden TES-5604 Series Installation And Operating Manual

2.5.3 TES-5683M+TES-5683BX series

1. Speaker volume
Adjust the speakers and the LINE OUT via the "VOL."
knob on the TES-5683BX, range: mute, -30 dB to 0 dB.
2. Treble/bass
Adjust the treble/bass of line out and speakers via the
"Treble"/"Bass" knobs on the TES-5683BX, range: -10
dB to 10 dB.
Note:
 The bass/treble is usually adjusted only during
the initial installation.
3. External microphone in and volume
A USB interface can connect to the external microphone
(TES-5604CSM(L)) and adjust the volume via MIC(USB)
knob.
4. Function switcher
Setting the AFC function, IR frequency and Auto fade via
the switcher (switch up is 1, switch down is 0)
Function
1. AFC function
2. IR frequency 2.33/3.0MHz
3. Reserved
4. Auto. fade
Note:
 The function parameters are usually adjusted
only during the initial installation;
 Auto Fade will shut down automatically if no
trigger signal has be received in 2 seconds.
5. PPT-page slides
TES-5683BX connects to PC via the USB interface,
cooperates with the TES-560x series microphone to
realize remote PPT-page slides. See 5.4.
6. Public address audio input
(only for TES-5683M+TES-5683BXP )
TES-5683BXP has a PA IN interface for public address
audio input. When enable the PA IN, the audio of PA IN
puts out to all outputs and all other inputs are muted.
PA IN volume knob can adjust the volume of PA IN.
1 0
On Off
1.67/2.33MHz
-- --
On Off

2.5.4 TES-5683M+TES-5684BX

1. External microphone in and volume
A USB interface can connect to the external microphone
(TES-5604CSM(L)) and adjust the volume via MIC(USB)
knob.
2. IR frequency
Setting the IR frequency via the switcher:
No. Frequency
1 1.67 MHz
2 2.33 MHz
30